1 ).	After you use an earlier version of NTFSDOS Professional on a Windows XP-based computer to transfer data from an NTFS partition to a FAT32 partition, some data becomes corrupted and unreadable
	Describes a problem that occurs when you use a version of NTFSDOS Professional that is earlier than version 4.02. Problem does not occur on Windows 2000-based or on Windows NT4-based computers
2 ).	Error message when you run NTFSDOS Professional 4.2 or NTFSDOS Professional 5.0: "Could not mount NTFS partition on drive C"
	Describes a problem in which NTFSDOS Professional may start mounting partitions by using drive letter D. This problem occurs on a computer that has no FAT partitions and no FAT32 partitions.
3 ).	You cannot detect a device by using the NTFSDOS Professional component in the Winternals Administrators Pak
	Describes a problem in which you cannot detect a device by using the NTFSDOS Professional component in the Winternals Administrators Pak. A resolution is provided.
4 ).	Error message when you try to access the CD-ROM by using NTFSDOS Professional: "Hi, I'm exception error <memory addresses>"
	Explains an issue in which you receive an error message when you try to access the CD-ROM by using NTFSDOS Professional. Supplies a workaround to work around thisproblem.
5 ).	How to manually reinstall a service pack by using Remote Recover
	Describes how to manually reinstall a service pack by using Remote Recover.
6 ).	You cannot load TCPView Professional by using the Tdimsys Service
	Describes the behavior of TCPView Professional. So that TCPView Professional can monitor all the TCP/IP activities, you can only load TCPView Professional when the system starts.
7 ).	Adding\Removing specific NIC drivers from the Client Setup Utility with Remote recover
	Adding\Removing specific NIC drivers on the default list in the Remote Recover Client Setup. When using the Remote Recover Client Setup you are provided with a limited number of NDIS2 drivers. You may want to tailor this list for your particular...
8 ).	You receive an error message when you start Remote Recover Client on a computer that has two network adapters
	Describes a problem in which you may receive an error message when you start Remote Recover Client on a computer that has dual network adapters.
9 ).	How to exit NTFSDOS Professional without restarting the computer
	Describes how to exit NTFSDOS Professional without restarting the computer.
10 ).	The long file names (LFN) feature is not supported in NTFSDOS Professional
	Describes an issue that occurs because LFN is supported only between NTFS partitions. Provides a workaround.
11 ).	Error message when you run the NTFSCHK utility on an NTFS partition:"Out of Interupt Stacks!"
	Describes a problem in which you may receive an error message when you run the NTFSCHK utility on a NTFS partitions.
12 ).	You cannot use the Locksmith utility to change the password for a domain account
	Explains that you cannot change the password for a domain account by using the Locksmith utility.
13 ).	Error message when you try to load NTFSDOS Professional: "Last volume sector is not a boot sector mirror"
	Error message when you try to load NTFSDOS Professional: "Last volume sector is not a boot sector mirror"
14 ).	Will this allow me to install Win9x/ME on an NTFS partition?
	Is it possible to install Win9x/ME on an NTFS partition using NTFSPro? NO, NTFSPro will NOT allow you to install Win9x/ME on an NTFS partition. It will only give DOS read/write access to NTFS partitions. Win9x/ME does not support installing to or...
15 ).	Remote Recover support for a RAID array on the client computer
	Describes whether Remote Recover can recognize a RAID array on the client computer.

[ 1 ] 2 3 4 5 ... 8

Page 1 of 8 Next Page

PC Fixer

Fix a wide variety of PC problems for Free!