Windows Server 2008 for Itanium-Based System
| 1 ). | Stop error on a computer that is running an Itanium-based version of Windows Server 2008 and that has Qlogic 8-gigabyte Fibre Channel cards installed: "STOP 0x0000007B" |
| Fixes a problem in which you may receive a "STOP 0x0000007B" error or see a yellow exclamation mark (!) next to a device in Device Manager. | |
| 2 ). | A hotfix is available that corrects an issue in the memory allocation logic of the Itanium-based version of Windows Server 2008 |
| Fixes an issue in the memory allocation logic of the Itanium-based version of Windows Server 2008. When the system allocates memory pages, it incorrectly allocates noncontiguous physical memory instead of contiguous memory. | |
| 3 ). | You receive a "Stop 0x00000050" or "Stop 0x0000000A" error message when you hot-replace memory on a Windows Server 2008-based computer |
| You receive a "Stop 0x00000050" or "Stop 0x0000000A" error message when you hot-replace memory on a Windows Server 2008-based computer | |
| 4 ). | USMT fails to install on Windows Server |
| When attempting to install USMT 3.0, 3.0.1, or 3.0.2 on Windows Server 2003 or Windows Sever 2008 the installer exits with the following error: “There is a problem with this Windows Installer package. A program run as part of the setup did not finish as... | |
| 5 ). | Moving DFSR Migration to the ELIMINATED state logs a misleading wrong event regarding read only domain controller objects |
| An event similar to the following may logged on all domain controllers (regardless of whether they are full domain controllers or RODCs) when the DFSR sysvol migration state is moved to ELIMINATED: Log Name: DFS Replication Source: DFSR Date: DD/MM/YYYY... | |
| 6 ). | TSG certificate binding is broken even after assigning the certificate using the TS Gateway manager snap-in |
| Consider the following scenario: In TS Gateway manager, you attempt to assign a SSL certificate to a TS Gateway, it is initially accepted but when the console is refreshed a message is displayed saying: "TSGateway is not fully configured as a TS gateway... | |
| 7 ). | After taking a snapshot of a SUSE Linux Enterprise Server 10 virtual machine, the system fails to complete a reboot |
| After taking a snapshot of a SUSE Linux Enterprise Server 10 Virtual Machine, the system fails to complete a reboot After taking a snapshot of a SUSE Linux Enterprise Server 10 (SLES 10) Virtual Machine with the integration components installed, the... | |
| 8 ). | Video performance may decrease when a Windows Server 2008-based computer has the Hyper-V role enabled and an accelerated display adapter installed |
| Describes a problem in which decreased performance may occur when a Windows Server 2008-based computer has the Hyper-V role enabled and an accelerated display adapter installed. | |
| 9 ). | You may experience unexpected behavior on a Windows Server 2008-based computer that has more than 32 paths to an MPIO disk |
| Describes a problem in which you may experience unexpected behavior on a Windows Server 2008-based computer that has more than 32 paths to an MPIO disk. For example, you may receive a "Stop 0x0000007f" error message. | |
| 10 ). | The Windows Server 2008 system may stop responding when an error occurs on one of the logical units of a storage array that is connected over a single MPIO path |
| Fixes a problem that occurs when you are running a Windows Server 2008-based computer that is connected to a storage array over a single Microsoft Multipath I/O path. | |
| 11 ). | Error message when you try to install the certification authority role on a Windows Server 2008-based computer: "Cannot install Certification Authority" |
| Describes a problem in which you receive an error message when you try to install the certification authority role on a Windows Server 2008-based computer. | |
| 12 ). | A Windows Server 2008-based computer may stop responding when you use a Device Specific Module that plugs into MPIO |
| Describes a problem that occurs when you expose the computer to a Microsoft Multipath I/O (MPIO)-based pseudo-logical unit number that uses the MPIO solution. | |
| 13 ). | The PdhLookupPerfNameByIndex API in Windows Server 2008 returns incorrect values for V2 performance counters |
| Describes an issue in which the PdhLookupPerfNameByIndex API in Windows Server 2008 returns incorrect values for V2 performance counters. Provides a resolution. | |
| 14 ). | Client connections return a "STATUS_INVALID_PARAM" error code when you use a "Send NTLMv2 response only" authentication level in Windows Server 2008 or in Windows Vista |
| Describes a problem in which the client connection may fail with a "STATUS_INVALID_PARAM" error code when you only use NTLMv2 authentication without any extended security support in Windows Server 2008 or in Windows Vista. | |
| 15 ). | A memory leak may occur in an application that uses the MS-FASP API to open and close policy store handles in Windows Vista or in Windows Server 2008 |
| Describes a problem in which a memory leak may occur if you have an application that opens and closes policy store handles by using the MS-FASP API in Windows Vista or in Windows Server 2008. | |
Page 1 of 3
Next Page
PC Fixer
Fix a wide variety of PC problems for Free!